Posted on 2018-04-02 The Dacromet coating has a good bond with the metal substrate, and has strong adhesion with other additional coatings. The treated parts are easy to spray color, and the adhesion with the organic coating even exceeds the phosphate film.
Good permeability of dacromet：due to the electrostatic shielding effect, it is difficult to plate zinc on the deep holes, slits, and the inner wall of the pipe, the above parts of the workpiece cannot be protected by electroplating. But Dacromet can enter the parts of the workpiece to form a Dacromet coating.
Dacromet is a new type of surface treatment technology. Compared with the traditional electroplating process, Dacromet is a kind of " green electroplating ".As a " green electroplating " process, the Dacromet process uses a closed-cycle approach, so it is virtually non-polluting.
The oil and dust removed during the treatment are collected and treated with special equipment. Only the water vapour evaporated from the coating is produced. After the determination, no hazardous substances controlled by the state are included. If the key structural parts and fasteners are used, Dacromet technology coating process is not only safe and reliable, but also beautiful and durable.
Post time: Jan-13-2022